Most of the calls we get come from houses built between 1958 and 2010, with the bulk of the stock going up through the 1980s and 90s. That matters, because a door installed in 1985 doesn't use the same hardware as one installed in 2005, and a torsion spring sized for a 1982-era door won't fit a newer steel panel setup without adjustment. We work on broken torsion and extension springs, openers that grind or won't respond, tracks knocked out of alignment, bent panels, worn rollers, and cables that have frayed through. Winters here run cold and hard, and that shows up in the calls: openers that struggle to lift a door stiffened by cold grease, weatherstripping that's shrunk and let the wind in, and steel sections that have started to rust at the bottom corner where snowmelt sits. We don't do windows or siding, and if your door is a total loss - split panel, bent track beyond straightening, an opener motor that's seized - we'll tell you replacement is the better call rather than billing you for a patch job that won't hold through the next cold stretch.
The people who show up at your house are the same people who answer the phone and price the job. We don't subcontract out to a different crew than the one you talked to. Everyone working on your door has handled the range of hardware you'll find in this area - older side-mounted torsion setups from the 1960s and 70s, the more common late-80s and 90s extension and torsion combinations, and newer center-mounted systems in homes built closer to 2010. That spread of ages means we carry parts for hardware that a shop specializing only in new construction wouldn't stock. If a part is obsolete enough that it has to be special-ordered, we'll say so up front instead of letting you find out after the truck's already there.
Call 1 (720) 738-8093 and you'll reach the office directly, not a dispatch center reading from a script. We're based at 1025 Eldorado Blvd in Broomfield, in reach of the areas around Interlocken, Lafayette, Northglenn, Louisville, Superior, and Erie, among the other towns within a short drive. Tell us the make of your opener if you know it, roughly how old the door is, and what it's doing - won't open, makes a bang, sags on one side. That's usually enough for us to tell you over the phone whether it sounds like a spring, a cable, an opener board, or something in the track, and to give you a straight idea of what the visit will involve before anyone drives out.
Once we've got the details, we'll get a time on the calendar and let you know what to expect. On a cold morning, plan on the door being stiffer than usual until it's been worked - that's normal for the climate here and not a sign the fix didn't take. We'll walk you through what we found, what we did, and what to watch for afterward, whether that's a spring under new tension, a realigned track, or an opener with fresh gearing. If the job turns out to be bigger than the door itself - a rotted jamb, wiring that needs an electrician - we'll tell you that too rather than working around it and letting you find out later. A repair that's done right the first time is cheaper than one that gets redone in six months.
Yes. Housing in this area spans 1958 through 2010, with most of it dating to the 1980s and 90s, so we carry parts and know the hardware for older torsion and extension spring setups as well as newer systems. If a part is old enough to be discontinued, we'll tell you that before starting the job.
Yes, this area sits in a severe cold climate band, and it shows up as stiff openers, shrunk weatherstripping, and grease that's thickened in the cold. A lot of what looks like a broken opener in January is really the cold slowing things down, though a genuinely dead motor still needs replacing.
We're at 1025 Eldorado Blvd in Broomfield, CO 80021. Call 1 (720) 738-8093 and you'll reach the office directly.
We do both, and we'll tell you honestly which one makes sense. If a door has a split panel, a badly bent track, or a seized opener motor, patching it usually costs more over time than replacing it, and we'd rather say that up front.
Call now or request a free quote - same-day service on most repairs, upfront written pricing.
